Kluberoil 4 UH1-150 克鲁勃 4 UH1-150 食品级润滑脂 20L

产品基本信息：
型号：oil 4 UH1-150
英文名称:KLUBER oil 4 UH1-150
粘度等级：ISO VG 150
品牌/产地：克鲁勃，德国
类型：食品级润滑油

宝贝描述：
说明：Klüberoil 4 UH1-15 ...680润滑油用于食品加工和制药业。他们符合要求德国法律对食品和辅助设备（LMBG，秒5，**，句子1）的要求中规定的21秒“的指导方针CFR178.3570的FDA规定“。他们被授权美国农业部在联邦检查使用肉类和禽类加工厂（USDA- H1）。特别是制定了在使用食品加工和制药业，这些润滑油展良好的抗磨损和极压性能的以及优良的低温特征。Klüberoil4 UH1 - 15..680非常良好的防腐蚀保护性能以及较高的老化和氧化稳定性。他们是根据剪应力和稳定没有泡沫。Klüberoil4 UH1 - 46..680油满足中电的要求。当测试在钻机IAW FZG齿轮DIN51354PT 2，A/8.3/90，有划伤的油舞台和12个具体的负载损失的<0.2毫克/千瓦时的重量。该油具有粘度ISO VG32 ...100满足性能测试要求，ISO VG32 ... 150种甚至履行在VDL要求。

应用：
Klüberoil4 UH1可用于而在摩擦点的润滑食品加工和制药机械。他们特别为刺激的润滑，斜面和蜗轮，轴承，主轴和关节，以及为润滑电梯，驱动和输送链在低温条件下。在ISO VG32 ... 68类型特别适合于气动维修设备的地方润滑油与USDA H1注册是必需的。Klüberoil4 UH1- 15是特别适合作为屏障介质机械密封面..

包装规格：20升罐200升鼓

英文：
Klüberoil 4 UH 1- 15...680
Lubricating oils for the Food Processing
and Pharmaceutical Industry

Description
Klüberoil 4 UH 1- 15 ...680 oils are
lubricants for the food processing
and pharmaceutical industry. They
meet the requirements of the
German law on food products and
ancillaries (LMBG, sec. 5, para 1,
sentence 1) and the requirements
set forth in the "guidelines of sec. 21
CFR 178.3570 of FDA regulations".
They have been authorized by the
USDA for use in federally inspected
meat and poultry plants (USDA-H1).
Especially formulated for use in the
food processing and pharmaceutical
industry, these lubricating oils exhibit
good antiwear and EP properties as
well as excellent low-temperature
characteristics.
Klüberoil 4 UH 1- 15...680 oils show
very good corrosion protection
properties as well as a high ageing
and oxidation stability. They are
stable under shear stress and do
not foam.
Klüberoil 4 UH 1- 46...680 oils meet
the CLP requirements. When tested
on the FZG gear rig IAW DIN 51 354
Pt 2, A/8.3/90, the oils have a scuffing
load stage of 12 and a specific
loss of weight of < 0.2 mg/kWh. The
oils having a viscosity ISO VG 32 ...
100 meet the HLP requirements, the
ISO VG 32 ... 150 types fulfill even
the VDL requirements.
Application
Klüberoil 4 UH 1 oils are used for
the lubrication of friction points in
food processing and pharmaceutical
machinery. They are especially
suitable for the lubrication of spur,
bevel and worm gears, bearings,
spindles and joints, as well as for the
lubrication of lift, drive and conveyor
chains at low temperatures.
The ISO VG 32 ... 68 types are
particularly suitable for pneumaticmaintenance equipment wherever
lubricants with a USDA-H1
registration are required.
Klüberoil 4 UH1-15 is especially
suitable as a barrier medium in
mechanical face seals.
Application notes
Gears:
Oil bath lubrication, oil bath circulating
lubrication and injection
lubrication
Chains:
Lubrication by means of brush, oil
can, oil bath, drip feed or oil pump
The low-viscosity types can also be
applied by oil-mist lubrication.
When applied via automatic systems,
the manufacturer's instructions on
oil temperature and viscosity have
to be observed.
Service temperature range
The values indicated are approximate
values depending on the lubricant's
composition, the intended use
and the application technique.
● Oil bath chain and gear lubrication
ISO VG 32 to 220:
approx. from -25 °C to 110 °C
ISO VG 460 and 680:
approx. from -20 °C to 110 °C
● Relubrication of chains at low
temperatures
ISO VG 15:
approx. from -50 °C
● Thermal resistance of the
lubricating film in case of total
loss lubrication, depending on
relubrication intervals
approx. up to 130 °C

Minimum shelf life
The minimum shelf life is approx 36
months if the product is stored in the
original closed container in a dry
place.

Pack sizes
20 l canister
200 l drum

Klüberoil 4 UH 1- 15... 680 oils
● USDA-H1 registration
● Wide service temperature
range
● Good protection against wear
● High load carrying capacity
● Good protection against
corrosion
● Almost neutral to sealing
materials and paints
● Depending on the product's
viscosity, CLP, HLP and VDL
requirements are met