克鲁勃润滑脂 克鲁勃STABURGASNBU30 PTM 克鲁勃STABURGASNBU30PTM

STABURAGS NBU 30 PTM是一种含有固体润滑剂的组装润滑脂。它具有耐水性和防止摩擦腐蚀（微动腐蚀）。它已经证明在高湿度的户外应用中是有效的。

应用

STABURAGS NBU 30 PTM适用于装配滑动间隙配合的应用的装配润滑脂。应用包括冷热水阀门和水龙头，滑道（特别是在灌装机中），阀门主轴和气缸导轨。该产品也可用作密封油脂。此外，它适用于滑道，螺栓，主轴和螺钉的润滑，例如，在铁路转向架组件。 STABURAGS NBU 30 PTM特别适用于轨道车辆的外部制动部件，例如螺栓和杆。 STABURAGS NBU 30 PTM便于装配和拆卸车辆中的ABS传感器。

应用笔记

使用气溶胶喷涂版本的STABURAGS NBU 30 PTM进行铁路制动器部件的再润滑，其中没有加入油嘴。为了地渗透到精细间隙中，我们建议喷涂至少8秒钟。这将提高轨道车辆中制动杆的效率，从而确保的维护间隔。当用于装配和润滑目的时，我们建议通过无绒布，手工或刷子将润滑剂轻轻涂抹在部件表面上。 STABURAGS NBU 30 PTM在低温至温度下显示出良好的粘合强度。 -40°C。

Klüber Staburags NBU 30 PTM Is a very adhesive assembly grease.

Klüber Staburags NBU 30 PTM is a Lubricating and assembly grease.

Benefits for your application

– Assembly grease protecting against tribo-corrosion

– Good corrosion protection

– Excellent resistance to water even under outdoor conditions

– Approved by the company Knorr Bremse, N 12006-37

Deion

STABURAGS NBU 30 PTM is an assembly grease containing a solid lubrica. It is resistant to water and protects against tribocorrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.

Application

STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM facilitates assembly and disassembly of ABS sensors in vehicles.

Application notes

Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals. When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush. STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -40 °C.