| 品牌 | Kluber克鲁勃 |
|---|---|
| 型号 | EG 4-1000 |
宝贝描述：
Klübersynth EG 4-150(220,320,460,680,1000)
合成高性能齿轮油
说明:Klübersynth EG4G该油是合成高性能齿轮油符合要求的电和AGMA。他们还矿物油混溶。除了其出色的防腐和抗磨损性能，这些油是非常耐老化和氧化，并提供卓越的服务在低温下。他们还表现出低的趋势以泡沫。在FZG测试（A10/16，6R/90）的擦伤负荷的GL- 4的容量达到了。
应用领域：Klübersynth EG4该油特别适合润滑摩擦点受到高负荷在很宽的温度范围。该油可以用来润滑刺激，斜面和蜗轮。Klübersynth EG4稳定根据剪应力，并提供破乳剂优异的性能。中立的油反应总体上如常见的密封材料NBR或FPM和油漆。护理但应采取的从不同的弹性体制造商可以有不同的行为。因此，在“兼容性提供的数据与弹性体“一节应作参考，仅供参考。
性能：Klübersynth EG4合成高性能齿轮油划伤负载能力符合API GL4与矿物油混溶出色的防腐蚀保护耐老化
包装规格：19L,208L
德文：
Klübersynth EG 4 oils
Synthetic high-performance gear oils
Synthetic high-performance gear oils
Description
The Klübersynth EG 4 oils are fully
synthetic high-performance gear oils
conforming to the demands of CLP
and AGMA. They are also mineral
oil miscible.
In addition to their excellent anticorrosion
and anti-wear properties,
these oils are very resistant to
ageing and oxidation and offer
exceptional service at low temperatures.
They also show a low tendency
to foam. In the FZG test
(A10/16,6R/90) a scuffing load
capacity of GL 4 was achieved.
Fields of application
The Klübersynth EG 4 oils are
particularly suitable for lubricating
friction points subject to high loads
over a wide temperature range. The
oils can be used to lubricate spur,
bevel and worm gears.
Klübersynth EG 4 oils are stable
under shear stress and offer
excellent demulsifying properties.
The oils react on the whole neutrally
to common seal materials such as
NBR or FPM and lacquers. Care
should nevertheless be taken, as
elastomers from different manufacturers
can behave differently. Therefore
the data given in the compatibility
with elastomers“ section
should be used for reference
purposes only. For this reason a
compatibility test should always be
carried out with the elastomers
which are actually used.
Application notes
The oils can be applied using the
immersion, immersion circulation
and injection methods. Total loss
lubrication is possible with drip-feed,
brush or oil feeder application. It is
possible to apply the oils automatically,
but attention should be paid
to the maximum processableviscosity value in the manufacturer’s
instructions.
Viscosity selection for rolling
bearings and gears
To determine the correct oil viscosity
please refer to the bearing
manufacturer’s instructions or worksheet
3 from the Society of Tribology
(GfT).
The gear manufacturer’s instructions
always take priority when determining
the oil viscosity for gears.
If instructions are not available from
the gear manufacturer then the
viscosity can be determined from
the Klübersynth EG 4 oils – Selection
of oil viscosity for gears“ work
sheet.
Operating temperature range
Operating temperature values are
reference values which have been
established according to the lubricant
structure, desired application
and application engineering.
Gear and chain lubrication by
immersion:
Klübersynth EG 4-150 /...220
from approx. -35 °C to 140 °C
Klübersynth EG 4-320 /...460
from approx. -30 °C to 140 °C
Klübersynth EG 4-680
from approx. -25 °C to 140 °C
Klübersynth EG 4-1000
from approx. -15 °C to 120 °C
Storage
The minimum shelf life is approx.
36 months when stored carefully in
a dry place and in closed original
containers.
Klübersynth EG 4 oils
Synthetic high-performance
gear oils
Scuffing load capacity
conforms to API GL 4
Miscible with mineral oil
Excellent corrosion protection
Ageing resistance
Package sizes
19 l canister
208 l drum
